Engineering Simulation - ingeniare.net

Go to content

Engineering Simulation

Use and management of engineering simulator to support the development of projects. The simulators offered are the following: - CAESAR II for Flexibility Analysis of Piping Systems and - PV ELITE for complete design and evaluation of Pressure Vessel and Heat Exchanger.
(Note: The softwares used are licensed under the leasing agreement)
Using the software CAESAR II we made a completed evaluation of the structural responses and stresses of piping systems to international standards.
CAESAR II makes it easy to input and display all the data needed to accurately define a piping system analysis model.
Besides the evaluation of a piping system’s response to thermal, deadweight and pressure loads, CAESAR II analyzes the effects of wind, support settlement, seismic loads and wave loads.
Using the software PV Elite we made complete design and evaluation for vessel and heat exchanger.
PV Elite makes defining pressure boundary conditions for vessels and exchangers easy, even for load sets that require significant data input. PV Elite streamlines data entry by breaking the input down into sensible subsets.
PV Elite performs calculations in accordance with ASME Section VIII, Divisions 1 & 2, PD 5500, and EN 13445.
MAILING ADDRESS:
Calle Rosalia de Castro 3, piso bajo B
San Sebastian de los Reyes, 28702
Madrid, Spain
CONTACT:
Eng. Leonardo Bavaresco
Mobile Phone: +34 605760193
Email: info@ingeniare.net


Back to content